@article{oai:nagoya.repo.nii.ac.jp:00012710,
 author = {Kato, Katsumi and Kato, Hidenori and Ishida, Tsugunari and Okubo, Hitoshi and Tsuchiya, Kenji},
 issue = {6},
 journal = {Dielectrics and Electrical Insulation, IEEE Transactions on},
 month = {Dec},
 note = {For higher electrical insulator performance of vacuum circuit breakers (VCB), the surface flashover in vacuum should be improved. In particular, it is important to clarify how strongly surface charges influence the surface flashover mechanism. In this paper, we investigated the surface flashover characteristics based on the existence of surface charges on an alumina insulator in vacuum. We changed the location and magnitude of surface charges and measured surface flashover voltage. From our experimental results, an attempt was made to clarify the influence of charges on alumina dielectrics on impulse surface flashover characteristics in vacuum. From this, we concluded that (1) when surface charges were located near the cathode electrode, a positive charge made the surface flashover voltage lower and a negative charge made the surface flashover voltage higher; and, (2) when surface charges were located in the way of the discharge path, both positive and negative charges made the surface flashover voltage lower. We were able to explain these results by considering the influence of surface charges on the electric field at flashover and on the secondary electron emission avalanche.},
 pages = {1710--1716},
 title = {Influence of Surface Charges on Impulse Flashover Characteristics of Alumina Dielectrics in Vacuum},
 volume = {16},
 year = {2009}
}