@article{oai:nagoya.repo.nii.ac.jp:00030930,
 author = {Yamaguchi, Katumi and Kita, Shigeaki and Horaguchi, Iwao},
 issue = {2},
 journal = {Memoirs of the Faculty of Engineering, Nagoya University},
 month = {Mar},
 note = {Considerations were made on the flow of cutting fluid between tool rake and chip on the basis of orthogonal cutting experiments. The main experiments are as follows: (1) Variation of friction was measured when the cutting fluid was smeared instantaneously on the rake face through a small hole drilled on the workpiece side parallel to the cutting edge. (2) Conventional wet cuttings were made at various cutting speeds and widths of cut, and coefficient of friction was measured. It is ascertained that the cutting fluid flows into tool-chip contact region from the side of chip, and the lubricated area is restricted to the area near the side of the chip.},
 pages = {317--324},
 title = {Some considerations on flow of cutting fluid between tool and chip},
 volume = {28},
 year = {1977}
}