WEKO3
アイテム
Compressive fracture aspect of thick quasi-isotropic carbon fiber reinforced plastic laminates
http://hdl.handle.net/2237/00030894
http://hdl.handle.net/2237/0003089402e92e98-1617-47f0-8976-b1ce1b2cf90b
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
CSTE_2019_586_revised (4.4 MB)
|
|
| Item type | 学術雑誌論文 / Journal Article(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2019-11-15 | |||||
| タイトル | ||||||
| タイトル | Compressive fracture aspect of thick quasi-isotropic carbon fiber reinforced plastic laminates | |||||
| 言語 | en | |||||
| 著者 |
Goto, Keita
× Goto, Keita× Arai, Masahiro× Kano, Yuki× Hara, Eiichi× Ishikawa, Takashi |
|||||
| アクセス権 | ||||||
| アクセス権 | open access | |||||
| アクセス権URI | http://purl.org/coar/access_right/c_abf2 | |||||
| 権利 | ||||||
| 言語 | en | |||||
| 権利情報 | © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Carbon fibres | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Polymer-matrix composites (PMCs) | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Fracture | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Strength | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | High-speed images | |||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | The compressive fracture aspect for the thick quasi-isotropic carbon fiber reinforced plastic (CFRP) laminates was investigated using a high-speed camera to clarify the progress of the brooming fracture. The compressive fracture types of the laminates could be classified into two groups, i.e., the fractures initiating from the innermost 0° ply and those initiating from the fixed sections of the specimen. The standard deviation of the compressive strength for the innermost 0° ply-initiated fracture type was larger than that for the fixed-section fracture type, although the average compressive strengths for each fracture mode were similar. The initial fracture in the innermost 0° ply was caused by the microbuckling of the fibers. The numerical results demonstrated a considerable out-of-plane shear stress around the free edges of the specimen, especially for the innermost 0° ply. Such a shear stress is thought to cause the microbuckling at the innermost 0° ply, with the crack subsequently propagating toward the outer plies of the specimen. The compressive strength of the innermost 0° ply was an important factor affecting the fracture behavior of the thick quasi-isotropic CFRP laminates. | |||||
| 言語 | en | |||||
| 内容記述 | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | ファイル公開：2021-09-08 | |||||
| 言語 | ja | |||||
| 出版者 | ||||||
| 出版者 | Elsevier | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | journal article | |||||
| 出版タイプ | ||||||
| 出版タイプ | AM | |||||
| 出版タイプResource | http://purl.org/coar/version/c_ab4af688f83e57aa | |||||
| DOI | ||||||
| 関連タイプ | isVersionOf | |||||
| 識別子タイプ | DOI | |||||
| 関連識別子 | https://doi.org/10.1016/j.compscitech.2019.107706 | |||||
| ISSN（print） | ||||||
| 収録物識別子タイプ | PISSN | |||||
| 収録物識別子 | 0266-3538 | |||||
| 書誌情報 |
en : Composites Science and Technology 巻 181, p. 107706, 発行日 2019-09-08 |
|||||
| 著者版フラグ | ||||||
| 値 | author | |||||
